Auto Module Lab logoAUTO MODULELAB
NEVADA · MAIL-IN SERVICE

Ford EEC-V PCM Clone / Programming in Nevada

Ship your module from Las Vegas or anywhere in Nevada — we complete the work in 24 hours and ship it back at the return speed you choose at checkout — standard to overnight.

$250 flat Fast Turnaround ~2-3 day USPS from NV
Text Before You Buy

Why Nevada customers mail in ford eec-v pcm clone / programming

Nevada has roughly 2.5 million registered vehicles, and trucks, SUVs & imports make up much of what Las Vegas-area shops and owners mail us. Domestic work like ford eec-v pcm clone / programming runs high-volume across Nevada — we see a steady stream out of Las Vegas, Reno, Henderson. Cross-country west — about 2-3 days each way.

Metros we serve in Nevada

Las VegasRenoHendersonSparks

Nevada at a glance

  • ~2.5M registered vehicles statewide
  • Most common: trucks, SUVs & imports
  • Nevada requires emissions testing in the Las Vegas (Clark) and Reno (Washoe) urban areas; rural counties are exempt.

What you get

  • Your original PCM's data transferred to a hardware-matched donor — true clone where the platform supports it
  • Or the donor bench-flashed with the correct calibration for your VIN when a full clone isn't supported
  • Straight answer BEFORE you ship: true clone, calibration clone, or replacement programming — mapped from your service number
  • Bench read + verify of both units before anything is written
  • Bench communication test with a stable, regulated power supply
  • Clear install notes — including whether a PATS parameter reset or key programming applies at the car
  • Modules returned with tracking — return-shipping speed your choice at checkout

Shipping timeline — Nevada ↔ Arlington TX

USPS Priority routes west through the Southwest network; usually 2-3 days given the distance. Typical round-trip from Las Vegas or anywhere in Nevada:

  1. Day 0

    You ship

    USPS Priority from NV, ~$12

  2. Day 2-3

    We receive

    Workshop opens + inspects

  3. Day 3

    Work done

    24-hour bench turnaround

  4. ~Day 7

    Back to you

    Return speed you chose at checkout

Nevada FAQ

Common questions from customers shipping from Nevada.

How long does shipping take from Nevada to your Arlington TX workshop?
USPS Priority Mail from Las Vegas, NV reaches our Arlington workshop in about 2-3 business days. USPS Priority routes west through the Southwest network; usually 2-3 days given the distance. We start work the same day your module arrives and ship back next business day at the return speed you chose at checkout.
How much does it cost to ship a module from Nevada?
USPS Priority flat-rate from Nevada to Arlington TX runs about $12. The customer pays shipping to us; return shipping back to Nevada is selected at checkout — $14.95 standard (3-5 business days), $29.95 UPS 2-Day, or $74.95 UPS Next Day Air, flat nationwide. Cross-country west — about 2-3 days each way.
Do you accept ford eec-v pcm clone / programming modules from Nevada?
Yes — we receive modules from Las Vegas, Reno, Henderson, Sparks and the rest of Nevada regularly. With about 2.5 million registered vehicles statewide, trucks, SUVs & imports are the bulk of what we see from Nevada.
Is there a ford eec-v pcm clone / programming shop in Las Vegas I should use instead?
Most Las Vegas shops don't keep the bench equipment for ford eec-v pcm clone / programming — they'd forward the module to a specialist anyway, which adds a markup and a middleman. Going direct to us is usually faster and cheaper. Cross-country west — about 2-3 days each way.
Does Nevada vehicle inspection or emissions testing affect this service?
Nevada requires emissions testing in the Las Vegas (Clark) and Reno (Washoe) urban areas; rural counties are exempt. Our service is bench module programming only — you remain responsible for your vehicle's compliance with all Nevada and federal requirements.
Will this be a true plug-and-play clone?
On many applications, yes — calibration, VIN, and PATS security data all transfer, and the donor installs like your original never left. But not on every EEC-V: connector style, processor, and security storage differ across the family, so some jobs are a calibration clone (PATS still needs an initialization at the car) and some are replacement programming. We map which one yours is from the VIN and PCM label before you pay — we never promise a guaranteed exact clone for every 1996–2004 Ford.
What happens with PATS — will my keys still work?
Where the platform supports a full PATS data transfer, your existing keys keep working with no extra steps. Where it doesn't, the donor needs a PATS parameter reset or key programming after installation — an on-car procedure a locksmith or Ford dealer can do, and on many models there's a self-initialization procedure with two working keys. We tell you which case applies before you ship. If you'd rather remove PATS entirely on an off-road or race build, that's our separate Ford PATS delete service.

Full details

See the complete Ford EEC-V PCM Clone / Programming service page

Compatibility list, what it fixes / doesn't fix, shipping instructions, warranty.

Full Service Page

Same service from other states:

AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMaryland

Ship from Nevada today

Pay now, get the Arlington TX shipping address by email, drop it in the mail. Full round-trip from Las Vegas: about a week.

(817) 678-3252