Auto Module Lab logoAUTO MODULELAB
NORTH DAKOTA · MAIL-IN SERVICE

Ford EEC-V PCM Clone / Programming in North Dakota

Ship your module from Fargo or anywhere in North Dakota — we complete the work in 24 hours and ship it back at the return speed you choose at checkout — standard to overnight.

$250 flat Fast Turnaround ~3 day USPS from ND
Text Before You Buy

Why North Dakota customers mail in ford eec-v pcm clone / programming

North Dakota has roughly 0.9 million registered vehicles, and full-size pickups & 4x4 SUVs make up much of what Fargo-area shops and owners mail us. Domestic work like ford eec-v pcm clone / programming runs high-volume across North Dakota — we see a steady stream out of Fargo, Bismarck, Grand Forks. Cross-country far-north — about 3 days each way.

Metros we serve in North Dakota

FargoBismarckGrand ForksMinot

North Dakota at a glance

  • ~0.9M registered vehicles statewide
  • Most common: full-size pickups & 4x4 SUVs
  • North Dakota has no statewide periodic vehicle safety or emissions inspection program.

What you get

  • Your original PCM's data transferred to a hardware-matched donor — true clone where the platform supports it
  • Or the donor bench-flashed with the correct calibration for your VIN when a full clone isn't supported
  • Straight answer BEFORE you ship: true clone, calibration clone, or replacement programming — mapped from your service number
  • Bench read + verify of both units before anything is written
  • Bench communication test with a stable, regulated power supply
  • Clear install notes — including whether a PATS parameter reset or key programming applies at the car
  • Modules returned with tracking — return-shipping speed your choice at checkout

Shipping timeline — North Dakota ↔ Arlington TX

USPS Priority routes far north through the Central network; about 3 days given the distance. Typical round-trip from Fargo or anywhere in North Dakota:

  1. Day 0

    You ship

    USPS Priority from ND, ~$12

  2. Day 3

    We receive

    Workshop opens + inspects

  3. Day 4

    Work done

    24-hour bench turnaround

  4. ~Day 7

    Back to you

    Return speed you chose at checkout

North Dakota FAQ

Common questions from customers shipping from North Dakota.

How long does shipping take from North Dakota to your Arlington TX workshop?
USPS Priority Mail from Fargo, ND reaches our Arlington workshop in about 3 business days. USPS Priority routes far north through the Central network; about 3 days given the distance. We start work the same day your module arrives and ship back next business day at the return speed you chose at checkout.
How much does it cost to ship a module from North Dakota?
USPS Priority flat-rate from North Dakota to Arlington TX runs about $12. The customer pays shipping to us; return shipping back to North Dakota is selected at checkout — $14.95 standard (3-5 business days), $29.95 UPS 2-Day, or $74.95 UPS Next Day Air, flat nationwide. Cross-country far-north — about 3 days each way.
Do you accept ford eec-v pcm clone / programming modules from North Dakota?
Yes — we receive modules from Fargo, Bismarck, Grand Forks, Minot and the rest of North Dakota regularly. With about 0.9 million registered vehicles statewide, full-size pickups & 4x4 SUVs are the bulk of what we see from North Dakota.
Is there a ford eec-v pcm clone / programming shop in Fargo I should use instead?
Most Fargo shops don't keep the bench equipment for ford eec-v pcm clone / programming — they'd forward the module to a specialist anyway, which adds a markup and a middleman. Going direct to us is usually faster and cheaper. Cross-country far-north — about 3 days each way.
Does North Dakota vehicle inspection or emissions testing affect this service?
North Dakota has no statewide periodic vehicle safety or emissions inspection program. Our service is bench module programming only — you remain responsible for your vehicle's compliance with all North Dakota and federal requirements.
My Ford is a 2005 or newer — does this apply?
No — 2005+ Fords moved to newer PCM architectures with different security. This service is for the ~1996–2004 EEC-V era. Contact us with your VIN anyway and we'll point you at the right option for your module.
How much is it and how fast?
It is $250 flat — cloning and programming where supported — and a fast turnaround once your verified modules arrive. You choose your return-shipping speed at checkout: Standard $14.95, UPS 2-Day $29.95, or UPS overnight $74.95. Inbound shipping to the lab is customer-paid with your choice of carrier.

Full details

See the complete Ford EEC-V PCM Clone / Programming service page

Compatibility list, what it fixes / doesn't fix, shipping instructions, warranty.

Full Service Page

Same service from other states:

AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMaryland

Ship from North Dakota today

Pay now, get the Arlington TX shipping address by email, drop it in the mail. Full round-trip from Fargo: about a week.

(817) 678-3252