OKLAHOMA · MAIL-IN SERVICE

Speedometer / Tire & Gear Recalibration in Oklahoma

Ship your module from Oklahoma City or anywhere in Oklahoma — we complete the work in 24 hours and ship it back at the return speed you choose at checkout — standard to overnight.

$250 flat Fast Turnaround ~1 day USPS from OK
Text Before You Buy

Why Oklahoma customers mail in speedometer / tire & gear recalibration

Oklahoma has roughly 3.6 million registered vehicles, and full-size pickups & SUVs make up much of what Oklahoma City-area shops and owners mail us. Domestic work like speedometer / tire & gear recalibration runs high-volume across Oklahoma — we see a steady stream out of Oklahoma City, Tulsa, Norman. Neighboring state — typically 1 day each way, the fastest non-Texas round-trip.

Metros we serve in Oklahoma

Oklahoma CityTulsaNormanBroken Arrow

Oklahoma at a glance

  • ~3.6M registered vehicles statewide
  • Most common: full-size pickups & SUVs
  • Oklahoma has no statewide periodic vehicle safety or emissions inspection program.

What you get

  • Tire-size and axle-ratio parameters rewritten to match your actual setup, where supported
  • Speedometer, odometer, and VSS scaling corrected so speed reads true
  • Speed-based shift points corrected so the transmission stops hunting after a re-gear
  • Bench read + verify of your calibration before any changes
  • Calibration written back on the bench with a stable, regulated power supply
  • Bench communication tested before the module ships back
  • Module returned with tracking — return-shipping speed your choice at checkout

Shipping timeline — Oklahoma ↔ Arlington TX

USPS Priority is a quick hop north from the North Texas network; often next-day. Typical round-trip from Oklahoma City or anywhere in Oklahoma:

  1. Day 0

    You ship

    USPS Priority from OK, ~$9

  2. Day 1

    We receive

    Workshop opens + inspects

  3. Day 2

    Work done

    24-hour bench turnaround

  4. ~Day 3

    Back to you

    Return speed you chose at checkout

Oklahoma FAQ

Common questions from customers shipping from Oklahoma.

How long does shipping take from Oklahoma to your Arlington TX workshop?
USPS Priority Mail from Oklahoma City, OK reaches our Arlington workshop in about 1 business day. USPS Priority is a quick hop north from the North Texas network; often next-day. We start work the same day your module arrives and ship back next business day at the return speed you chose at checkout.
How much does it cost to ship a module from Oklahoma?
USPS Priority flat-rate from Oklahoma to Arlington TX runs about $9. The customer pays shipping to us; return shipping back to Oklahoma is selected at checkout — $14.95 standard (3-5 business days), $29.95 UPS 2-Day, or $74.95 UPS Next Day Air, flat nationwide. Neighboring state — typically 1 day each way, the fastest non-Texas round-trip.
Do you accept speedometer / tire & gear recalibration modules from Oklahoma?
Yes — we receive modules from Oklahoma City, Tulsa, Norman, Broken Arrow and the rest of Oklahoma regularly. With about 3.6 million registered vehicles statewide, full-size pickups & SUVs are the bulk of what we see from Oklahoma.
Is there a speedometer / tire & gear recalibration shop in Oklahoma City I should use instead?
Most Oklahoma City shops don't keep the bench equipment for speedometer / tire & gear recalibration — they'd forward the module to a specialist anyway, which adds a markup and a middleman. Going direct to us is usually faster and cheaper. Neighboring state — typically 1 day each way, the fastest non-Texas round-trip.
Does Oklahoma vehicle inspection or emissions testing affect this service?
Oklahoma has no statewide periodic vehicle safety or emissions inspection program. Our service is bench module programming only — you remain responsible for your vehicle's compliance with all Oklahoma and federal requirements.
My vehicle isn't a GM — can you still do it?
Sometimes. Bench recalibration only works on controllers that are unlocked and bench-readable. Many non-GM vehicles, newer locked controllers, and cluster-based systems must be recalibrated at the car over OBD and cannot be done by mail. Send us your VIN and module label and we will tell you up front whether yours is a bench job before you ship.
What information do you need to set it correctly?
Your new tire size and the size it replaced, and — if you re-geared — your new axle ratio and the original. We use those to rewrite the rolling-diameter and axle-ratio parameters so speed and distance calculate accurately.

Full details

See the complete Speedometer / Tire & Gear Recalibration service page

Compatibility list, what it fixes / doesn't fix, shipping instructions, warranty.

Full Service Page

Same service from other states:

Ship from Oklahoma today

Pay now, get the Arlington TX shipping address by email, drop it in the mail. Full round-trip from Oklahoma City: about a week.

(817) 678-3252