Auto Module Lab logoAUTO MODULELAB
WYOMING · MAIL-IN SERVICE

Speedometer / Tire & Gear Recalibration in Wyoming

Ship your module from Cheyenne or anywhere in Wyoming — we complete the work in 24 hours and ship it back at the return speed you choose at checkout — standard to overnight.

$250 flat Fast Turnaround ~2-3 day USPS from WY
Text Before You Buy

Why Wyoming customers mail in speedometer / tire & gear recalibration

Wyoming has roughly 0.9 million registered vehicles, and full-size pickups & 4x4 SUVs make up much of what Cheyenne-area shops and owners mail us. Domestic work like speedometer / tire & gear recalibration runs high-volume across Wyoming — we see a steady stream out of Cheyenne, Casper, Laramie. Cross-region northwest — about 2-3 days each way.

Metros we serve in Wyoming

CheyenneCasperLaramieGillette

Wyoming at a glance

  • ~0.9M registered vehicles statewide
  • Most common: full-size pickups & 4x4 SUVs
  • Wyoming has no statewide periodic vehicle safety or emissions inspection program.

What you get

  • Tire-size and axle-ratio parameters rewritten to match your actual setup, where supported
  • Speedometer, odometer, and VSS scaling corrected so speed reads true
  • Speed-based shift points corrected so the transmission stops hunting after a re-gear
  • Bench read + verify of your calibration before any changes
  • Calibration written back on the bench with a stable, regulated power supply
  • Bench communication tested before the module ships back
  • Module returned with tracking — return-shipping speed your choice at checkout

Shipping timeline — Wyoming ↔ Arlington TX

USPS Priority routes northwest through the Mountain network; usually 2-3 days given the distance. Typical round-trip from Cheyenne or anywhere in Wyoming:

  1. Day 0

    You ship

    USPS Priority from WY, ~$11

  2. Day 2-3

    We receive

    Workshop opens + inspects

  3. Day 3

    Work done

    24-hour bench turnaround

  4. ~Day 7

    Back to you

    Return speed you chose at checkout

Wyoming FAQ

Common questions from customers shipping from Wyoming.

How long does shipping take from Wyoming to your Arlington TX workshop?
USPS Priority Mail from Cheyenne, WY reaches our Arlington workshop in about 2-3 business days. USPS Priority routes northwest through the Mountain network; usually 2-3 days given the distance. We start work the same day your module arrives and ship back next business day at the return speed you chose at checkout.
How much does it cost to ship a module from Wyoming?
USPS Priority flat-rate from Wyoming to Arlington TX runs about $11. The customer pays shipping to us; return shipping back to Wyoming is selected at checkout — $14.95 standard (3-5 business days), $29.95 UPS 2-Day, or $74.95 UPS Next Day Air, flat nationwide. Cross-region northwest — about 2-3 days each way.
Do you accept speedometer / tire & gear recalibration modules from Wyoming?
Yes — we receive modules from Cheyenne, Casper, Laramie, Gillette and the rest of Wyoming regularly. With about 0.9 million registered vehicles statewide, full-size pickups & 4x4 SUVs are the bulk of what we see from Wyoming.
Is there a speedometer / tire & gear recalibration shop in Cheyenne I should use instead?
Most Cheyenne shops don't keep the bench equipment for speedometer / tire & gear recalibration — they'd forward the module to a specialist anyway, which adds a markup and a middleman. Going direct to us is usually faster and cheaper. Cross-region northwest — about 2-3 days each way.
Does Wyoming vehicle inspection or emissions testing affect this service?
Wyoming has no statewide periodic vehicle safety or emissions inspection program. Our service is bench module programming only — you remain responsible for your vehicle's compliance with all Wyoming and federal requirements.
Is this an odometer rollback service?
No. This corrects the calibration so the speedometer and odometer reflect the vehicle's actual tire size and axle ratio. It is not an odometer-rollback or mileage-alteration service and will never be used to misrepresent recorded mileage.
Will it fix a broken speed sensor?
No. Programming cannot repair a failed vehicle speed sensor, output-shaft sensor, or cluster hardware fault. If a mechanical sensor is bad, that must be repaired separately — recalibration only corrects the software scaling.

Full details

See the complete Speedometer / Tire & Gear Recalibration service page

Compatibility list, what it fixes / doesn't fix, shipping instructions, warranty.

Full Service Page

Same service from other states:

AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMaryland

Ship from Wyoming today

Pay now, get the Arlington TX shipping address by email, drop it in the mail. Full round-trip from Cheyenne: about a week.

(817) 678-3252