Auto Module Lab logoAUTO MODULELAB
TEXAS · MAIL-IN SERVICE

TCM / Transmission Programming in Texas

Ship your module from Houston or anywhere in Texas — we complete the work in 24 hours and ship it back at the return speed you choose at checkout — standard to overnight.

$250 flat Fast Turnaround ~1 day USPS from TX
Text Before You Buy

Why Texas customers mail in tcm / transmission programming

Texas has roughly 22.8 million registered vehicles, and full-size pickups & SUVs make up much of what Houston-area shops and owners mail us. TCM / Transmission Programming is a bench job most Houston shops don't keep equipment for, so owners and trade shops across Texas ship it to a specialist. Same-state — fastest possible round-trip.

Metros we serve in Texas

HoustonDallas-Fort WorthSan AntonioAustin

Texas at a glance

  • ~22.8M registered vehicles statewide
  • Most common: full-size pickups & SUVs
  • Texas requires an annual safety inspection program statewide, with OBD-II emissions testing in 17 metro counties.

What you get

  • Your original TCM data cloned onto the donor, or a used TCM programmed to match your vehicle, where supported
  • Calibration and stored adaptation carried over on a clone, where readable
  • TCM prepared so it communicates and matches after install
  • Bench read + verify before any changes are written
  • Bench communication tested with a stable, regulated power supply
  • Clear instructions on the at-the-car shift-adaptation drive cycle to finish
  • Module returned with tracking — return-shipping speed your choice at checkout

Shipping timeline — Texas ↔ Arlington TX

USPS Priority routes through the North Texas distribution network; 1 day from most of the state. Typical round-trip from Houston or anywhere in Texas:

  1. Day 0

    You ship

    USPS Priority from TX, ~$9

  2. Day 1

    We receive

    Workshop opens + inspects

  3. Day 2

    Work done

    24-hour bench turnaround

  4. ~Day 3

    Back to you

    Return speed you chose at checkout

Texas FAQ

Common questions from customers shipping from Texas.

How long does shipping take from Texas to your Arlington TX workshop?
USPS Priority Mail from Houston, TX reaches our Arlington workshop in about 1 business day. USPS Priority routes through the North Texas distribution network; 1 day from most of the state. We start work the same day your module arrives and ship back next business day at the return speed you chose at checkout.
How much does it cost to ship a module from Texas?
USPS Priority flat-rate from Texas to Arlington TX runs about $9. The customer pays shipping to us; return shipping back to Texas is selected at checkout — $14.95 standard (3-5 business days), $29.95 UPS 2-Day, or $74.95 UPS Next Day Air, flat nationwide. Same-state — fastest possible round-trip.
Do you accept tcm / transmission programming modules from Texas?
Yes — we receive modules from Houston, Dallas-Fort Worth, San Antonio, Austin and the rest of Texas regularly. With about 22.8 million registered vehicles statewide, full-size pickups & SUVs are the bulk of what we see from Texas.
Is there a tcm / transmission programming shop in Houston I should use instead?
Most Houston shops don't keep the bench equipment for tcm / transmission programming — they'd forward the module to a specialist anyway, which adds a markup and a middleman. Going direct to us is usually faster and cheaper. Same-state — fastest possible round-trip.
Does Texas vehicle inspection or emissions testing affect this service?
Texas requires an annual safety inspection program statewide, with OBD-II emissions testing in 17 metro counties. Our service is bench module programming only — you remain responsible for your vehicle's compliance with all Texas and federal requirements.
What's the difference between cloning and programming a used TCM?
Cloning copies your original TCM's exact data onto a donor unit (keeping calibration and adaptation). Programming a used TCM configures a different used unit so it matches and communicates with your vehicle. We recommend the path that fits your parts — tell us which you have.
Does the transmission relearn happen on the bench?
No. The bench work matches and prepares the module so it communicates. The final shift-adaptation / quick-learn happens at the car, because the transmission relearns its shift behavior while driving after install. We include instructions for that drive cycle.

Full details

See the complete TCM / Transmission Programming service page

Compatibility list, what it fixes / doesn't fix, shipping instructions, warranty.

Full Service Page

Same service from other states:

AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMaryland

Ship from Texas today

Pay now, get the Arlington TX shipping address by email, drop it in the mail. Full round-trip from Houston: about a week.

(817) 678-3252