Auto Module Lab logoAUTO MODULELAB
COLORADO · MAIL-IN SERVICE

Chrysler EPS Steering Module — Programmed to Your VIN in Colorado

Ship your module from Denver or anywhere in Colorado — we complete the work in 24 hours and ship it back at the return speed you choose at checkout — standard to overnight.

$449 flat Ships in 1–2 Business Days ~2 day USPS from CO
Text Before You Buy

Why Colorado customers mail in chrysler eps steering module — programmed to your vin

Colorado has roughly 5.3 million registered vehicles, and trucks & 4x4 SUVs make up much of what Denver-area shops and owners mail us. Domestic work like chrysler eps steering module — programmed to your vin runs high-volume across Colorado — we see a steady stream out of Denver, Colorado Springs, Aurora. Regional west — about 2 days each way.

Metros we serve in Colorado

DenverColorado SpringsAuroraFort Collins

Colorado at a glance

  • ~5.3M registered vehicles statewide
  • Most common: trucks & 4x4 SUVs
  • Colorado requires emissions testing in the Denver-Boulder Front Range metro region; rural counties are exempt.

What you get

  • The EPS module itself — you send nothing in
  • Your VIN written to the module so it does not throw a mismatch
  • A straight answer on whether a software update would fix your fault instead
  • Bench-verified before it ships
  • Written install, calibration, and alignment notes in the box
  • Outbound shipping speed your choice at checkout — standard, 2-day, or overnight
  • 6-month warranty on the module and the programming

Shipping timeline — Colorado ↔ Arlington TX

USPS Priority runs northwest from the North Texas network; roughly 2 days. Typical round-trip from Denver or anywhere in Colorado:

  1. Day 0

    You ship

    USPS Priority from CO, ~$11

  2. Day 2

    We receive

    Workshop opens + inspects

  3. Day 3

    Work done

    24-hour bench turnaround

  4. ~Day 5

    Back to you

    Return speed you chose at checkout

Colorado FAQ

Common questions from customers shipping from Colorado.

How long does shipping take from Colorado to your Arlington TX workshop?
USPS Priority Mail from Denver, CO reaches our Arlington workshop in about 2 business days. USPS Priority runs northwest from the North Texas network; roughly 2 days. We start work the same day your module arrives and ship back next business day at the return speed you chose at checkout.
How much does it cost to ship a module from Colorado?
USPS Priority flat-rate from Colorado to Arlington TX runs about $11. The customer pays shipping to us; return shipping back to Colorado is selected at checkout — $24.95 standard (3-5 business days), $54.95 UPS 2-Day, or $94.95 UPS Next Day Air, flat nationwide. Regional west — about 2 days each way.
Do you accept chrysler eps steering module — programmed to your vin modules from Colorado?
Yes — we receive modules from Denver, Colorado Springs, Aurora, Fort Collins and the rest of Colorado regularly. With about 5.3 million registered vehicles statewide, trucks & 4x4 SUVs are the bulk of what we see from Colorado.
Is there a chrysler eps steering module — programmed to your vin shop in Denver I should use instead?
Most Denver shops don't keep the bench equipment for chrysler eps steering module — programmed to your vin — they'd forward the module to a specialist anyway, which adds a markup and a middleman. Going direct to us is usually faster and cheaper. Regional west — about 2 days each way.
Does Colorado vehicle inspection or emissions testing affect this service?
Colorado requires emissions testing in the Denver-Boulder Front Range metro region; rural counties are exempt. Our service is bench module programming only — you remain responsible for your vehicle's compliance with all Colorado and federal requirements.
Could a software update fix my car instead?
Sometimes, yes — on these systems a reflash occasionally clears the fault with no parts at all. Send us your VIN and stored codes before you order and we will tell you honestly if that is worth trying first. We would rather lose the sale than sell you a module you did not need.
What does the dealer charge?
Dealers commonly replace the entire steering rack assembly, which typically runs $1,800-$2,700, and control-module replacement alone is often quoted around $1,100-$1,200. This is $449 shipped, programmed to your VIN.

Full details

See the complete Chrysler EPS Steering Module — Programmed to Your VIN service page

Compatibility list, what it fixes / doesn't fix, shipping instructions, warranty.

Full Service Page

Same service from other states:

AlabamaAlaskaArizonaArkansasCaliforniaConnecticutDelawareFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMarylandMassachusetts

Ship from Colorado today

Pay now, get the Arlington TX shipping address by email, drop it in the mail. Full round-trip from Denver: about a week.

(817) 678-3252