Auto Module Lab logoAUTO MODULELAB
UTAH · MAIL-IN SERVICE

GM AFM / DOD / DFM Disable Programming in Utah

Ship your module from Salt Lake City or anywhere in Utah — we complete the work in 24 hours and ship it back at the return speed you choose at checkout — standard to overnight.

$250 flat Fast Turnaround ~2-3 day USPS from UT
Text Before You Buy

Why Utah customers mail in gm afm / dod / dfm disable programming

Utah has roughly 2.7 million registered vehicles, and trucks & 4x4 SUVs make up much of what Salt Lake City-area shops and owners mail us. Domestic work like gm afm / dod / dfm disable programming runs high-volume across Utah — we see a steady stream out of Salt Lake City, West Valley City, Provo. Cross-country northwest — about 2-3 days each way.

Metros we serve in Utah

Salt Lake CityWest Valley CityProvoOgden

Utah at a glance

  • ~2.7M registered vehicles statewide
  • Most common: trucks & 4x4 SUVs
  • Utah requires emissions testing in its most populous Wasatch Front counties; the rest of the state is exempt.

What you get

  • AFM / Displacement On Demand disabled in the ECM calibration when supported
  • ECM programmed so the engine stays in V8 mode (system present but disabled)
  • Bench read + verify of your calibration before any changes
  • Calibration written back on the bench with a stable, regulated power supply
  • Bench communication tested before the module ships back
  • ECM returned with tracking — return-shipping speed your choice at checkout
  • Programming since 2012, by an experienced module programmer

Shipping timeline — Utah ↔ Arlington TX

USPS Priority routes northwest through the Mountain network; usually 2-3 days given the distance. Typical round-trip from Salt Lake City or anywhere in Utah:

  1. Day 0

    You ship

    USPS Priority from UT, ~$12

  2. Day 2-3

    We receive

    Workshop opens + inspects

  3. Day 3

    Work done

    24-hour bench turnaround

  4. ~Day 7

    Back to you

    Return speed you chose at checkout

Metros in Utah:

Salt Lake City, UT (1.3M)

Utah FAQ

Common questions from customers shipping from Utah.

How long does shipping take from Utah to your Arlington TX workshop?
USPS Priority Mail from Salt Lake City, UT reaches our Arlington workshop in about 2-3 business days. USPS Priority routes northwest through the Mountain network; usually 2-3 days given the distance. We start work the same day your module arrives and ship back next business day at the return speed you chose at checkout.
How much does it cost to ship a module from Utah?
USPS Priority flat-rate from Utah to Arlington TX runs about $12. The customer pays shipping to us; return shipping back to Utah is selected at checkout — $14.95 standard (3-5 business days), $29.95 UPS 2-Day, or $74.95 UPS Next Day Air, flat nationwide. Cross-country northwest — about 2-3 days each way.
Do you accept gm afm / dod / dfm disable programming modules from Utah?
Yes — we receive modules from Salt Lake City, West Valley City, Provo, Ogden and the rest of Utah regularly. With about 2.7 million registered vehicles statewide, trucks & 4x4 SUVs are the bulk of what we see from Utah.
Is there a gm afm / dod / dfm disable programming shop in Salt Lake City I should use instead?
Most Salt Lake City shops don't keep the bench equipment for gm afm / dod / dfm disable programming — they'd forward the module to a specialist anyway, which adds a markup and a middleman. Going direct to us is usually faster and cheaper. Cross-country northwest — about 2-3 days each way.
Does Utah vehicle inspection or emissions testing affect this service?
Utah requires emissions testing in its most populous Wasatch Front counties; the rest of the state is exempt. Our service is bench module programming only — you remain responsible for your vehicle's compliance with all Utah and federal requirements.
Do I still need programming after a mechanical AFM delete?
Yes. If the AFM hardware is removed, the ECM should still be programmed so AFM / DOD is disabled in the calibration to match the build.
What ECMs are supported?
AutoModuleLab currently supports GM E38, E67, E92, and E92A ECMs after verification. E38 is the primary application (2007–2014 Gen 4 V8 trucks and SUVs — 5.3, 6.0, 6.2); E67, E92, and E92A are confirmed case-by-case from your VIN and ECM label photo. Support always depends on the year, model, engine, operating system, and calibration. We do not currently offer E90, E93, E99, or Global B unlock/upgrade services.

Full details

See the complete GM AFM / DOD / DFM Disable Programming service page

Compatibility list, what it fixes / doesn't fix, shipping instructions, warranty.

Full Service Page

Same service from other states:

AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMaryland

Ship from Utah today

Pay now, get the Arlington TX shipping address by email, drop it in the mail. Full round-trip from Salt Lake City: about a week.

(817) 678-3252