Auto Module Lab logoAUTO MODULELAB
VERMONT · MAIL-IN SERVICE

Toyota/Lexus ECU Immobilizer Reset (Add Keys) in Vermont

Ship your module from Burlington or anywhere in Vermont — we complete the work in 24 hours and ship it back at the return speed you choose at checkout — standard to overnight.

$250 flat Fast Turnaround ~3 day USPS from VT
Text Before You Buy

Why Vermont customers mail in toyota/lexus ecu immobilizer reset (add keys)

Vermont has roughly 0.6 million registered vehicles, and trucks & 4x4 SUVs make up much of what Burlington-area shops and owners mail us. Toyota/Lexus ECU Immobilizer Reset (Add Keys) is a bench job most Burlington shops don't keep equipment for, so owners and trade shops across Vermont ship it to a specialist. Cross-country northeast — about 3 days each way.

Metros we serve in Vermont

BurlingtonSouth BurlingtonRutlandMontpelier

Vermont at a glance

  • ~0.6M registered vehicles statewide
  • Most common: trucks & 4x4 SUVs
  • Vermont requires an annual safety and OBD-II emissions inspection statewide.

What you get

  • A NEW transponder key (correct 4C or 4D chip) — cut, programmed, and ready to start the car, included with the service
  • Bench EEPROM read + verify of your Denso engine ECU (or transponder ECU)
  • Immobilizer key registers reset and the new key programmed in as a master
  • Factory immobilizer kept fully active (this is not an immo delete)
  • Step-by-step instructions for reinstall and for adding more keys later
  • Bench-tested module before it ships back
  • Module returned with tracking — return-shipping speed your choice at checkout
  • Programming since 2012, by an experienced module programmer

Shipping timeline — Vermont ↔ Arlington TX

USPS Priority routes far northeast through the New England network; typically 3 days. Typical round-trip from Burlington or anywhere in Vermont:

  1. Day 0

    You ship

    USPS Priority from VT, ~$13

  2. Day 3

    We receive

    Workshop opens + inspects

  3. Day 4

    Work done

    24-hour bench turnaround

  4. ~Day 7

    Back to you

    Return speed you chose at checkout

Vermont FAQ

Common questions from customers shipping from Vermont.

How long does shipping take from Vermont to your Arlington TX workshop?
USPS Priority Mail from Burlington, VT reaches our Arlington workshop in about 3 business days. USPS Priority routes far northeast through the New England network; typically 3 days. We start work the same day your module arrives and ship back next business day at the return speed you chose at checkout.
How much does it cost to ship a module from Vermont?
USPS Priority flat-rate from Vermont to Arlington TX runs about $13. The customer pays shipping to us; return shipping back to Vermont is selected at checkout — $14.95 standard (3-5 business days), $29.95 UPS 2-Day, or $74.95 UPS Next Day Air, flat nationwide. Cross-country northeast — about 3 days each way.
Do you accept toyota/lexus ecu immobilizer reset (add keys) modules from Vermont?
Yes — we receive modules from Burlington, South Burlington, Rutland, Montpelier and the rest of Vermont regularly. With about 0.6 million registered vehicles statewide, trucks & 4x4 SUVs are the bulk of what we see from Vermont.
Is there a toyota/lexus ecu immobilizer reset (add keys) shop in Burlington I should use instead?
Most Burlington shops don't keep the bench equipment for toyota/lexus ecu immobilizer reset (add keys) — they'd forward the module to a specialist anyway, which adds a markup and a middleman. Going direct to us is usually faster and cheaper. Cross-country northeast — about 3 days each way.
Does Vermont vehicle inspection or emissions testing affect this service?
Vermont requires an annual safety and OBD-II emissions inspection statewide. Our service is bench module programming only — you remain responsible for your vehicle's compliance with all Vermont and federal requirements.
Do you supply and cut the new key?
Yes — a new transponder key with the correct chip (4C for most ~1997–2003, 4D-67/68 for most ~2003–2010) is included with the service, cut and programmed so it's ready to start the car the moment the module goes back in. To cut the blade we need one of two things in the box: your driver- or passenger-side door lock (we decode the key code from it) or a current key blade we can copy — a blade cannot be cut from the VIN alone.
Which door lock do I send, and how do I remove it?
Either the driver- or passenger-side door lock cylinder works — most customers pull the passenger-side lock so the driver's door keeps working while the car is apart. On most of these models it comes out with the interior door panel off and one clip or screw. If you'd rather not pull a lock, a current key blade — even a non-transponder copy or a worn valet key — gives us the cuts instead.

Full details

See the complete Toyota/Lexus ECU Immobilizer Reset (Add Keys) service page

Compatibility list, what it fixes / doesn't fix, shipping instructions, warranty.

Full Service Page

Same service from other states:

AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMaryland

Ship from Vermont today

Pay now, get the Arlington TX shipping address by email, drop it in the mail. Full round-trip from Burlington: about a week.

(817) 678-3252